COE 90 & COE 96
Fused Glass Supplies
Hi Fire Glass Decals
FREE Fusible Projects
Art Glass Supplies
Not logged in
Home » FUSING GLASS MOLDS » GLASS FUSING MOLDS - Shaping Molds, Drop Rings & Small Casting Molds
Fusing Draping/Slumping Mold: Jewelry Slumper
Length: 4 5/8 inches (117.475mm)
Width: 2 5/8 inches (66.675mm)
Diameter: 1 5/8 inches (82.55mm) each slumper
Uses: Create a dome version of your glass circle pendants. Gives you pendant a 3D effect that is very appealing to buyers. Our 1 1/2 to 1 5/8 inch precut glass designs are perfect for the slumped curve, dome effect.
Click here to see Project Example 1
or Click See More under photo to see a Photo Example.
Click here to see Project Example 2
**Our Precoated Ceramic Mold is "Ready to Fire"!
(Note: Only after several firings you will need to recoat with Kiln Wash.)
Do Not use a circle larger than 2 inches, 1 5/8 is recommened largest size. In addition to kiln wash on the mold, we suggest with larger circles you use a piece of thin fire paper between the mold and the glass to insure glass release.
It is easy to use and good for countless firings. Smooth surface, accepts kiln wash uniformly, and will not crack under repeated usage when handled properly. Individual molds may have slight variations in dimensions as shown. Note: Always elevate molds with kiln posts for good circulation.
« Previous | Next »
RELATED PRODUCT ITEMS
Copyright © 2014 Glassartpatterns.com, A Sanborn Corporation, All rights reserved.Design and Hosting by Sanborn
Web Designs (14)
Sanborn Corporation | Sanborn
Web Designs | Glass
Art World | Glass