FREE FUSIBLE GLASS MOSAIC PROJECTS

Mosaic Picture Frames & Mirrors Mosaic Glass Variety Projects Mosaic Glass Stepping Stones   Mosaic Glass Tables   MOSAIC Glass Red, White & Blue Star Table Materials List See Category: Mosaic Glass Kit: Item# 16202 (Qty 2) 2 Inch White Stars Item# 96119 (Qty 5) 1 Inch White Stars  Glass Supplies & Tools: Item# 48017 Round Mosaic Table Item# 41103 Weldbond Adhesive for Glass Item #41904 0000 Steel Wool Item# 41024 Black Grout 1 pound  Item# 40196 Mosaic Nippers (Glass Tool) · 1 Square Feet of Blue glass to be used for the star background.  · 1 Square Feet of each Red & White glass to be used for the background Stripes.  Print Pattern Below and increase to 3 times the size Tip:  You can make mosaic pieces by scoring the glass at ½” intervals and then breaking. Use mosaic nippers to create the mosaic pieces from the ½” strips.  · Latex/rubber gloves · Sponge · Masking Tape · Razor Blade or X-acto™ Knife · Step 1: Prepare the Table Top  Mix one part Weldbond glue with one part water. Coat the top of the table with the solution. This will provide a waterproof protective barrier between the wood table top and the mosaic pieces. This process prevents the wood from warping. Step 2:  Remove Glass  To keep from breaking the precut pieces of glass, remove them from the package using an X-acto knife or razor blade. Step 3:  Transfer Star Pattern to Table Top Enlarge the star pattern at the bottom of the page 300% at you local photo copy center. The star should be approximately 15" Draw the large star in the center of the table using the star pattern.  Step 4: Fill in Blue Star Glue the 2” and 1” stars inside the large star drawn on the table top with Weldbond glue. Fill in remaining areas with the blue glass cut into chips. After the design is complete allow the project to dry for 24 hours.  Step 5:  Fill in Background with Red and White Stripes Cut the red and white glass into 1 3/8” strips. Fill in the background by alternating red and white strips as shown in the picture. Cut and fit one stripe at a time by laying the strip where it will be positioned and marking the strip where it should be cut to fit. Repeat until the background stripes are finished and glue. Grind if necessary. Step 5 - Grouting Place the project on newspaper. Mix grout with a small amount of water until the grout is the consistency of a thick milk shake. Spread the grout with your gloved hand and press grout into all crevices. Wait 10 minutes to allow the grout to set up. Step 6 - Cleanup Carefully wipe the grout with a lightly dampened sponge being careful not to pull grout out of the crevices. Rinse sponge frequently. Remember it is import the sponge be as dry as possible. After the excess grout has been removed allow the grout to dry for another 15 minutes. Use a soft cloth and ‘0000’ steel wool to clean the glass. Use a razor blade to remove spots of dried glue.  GlassArtPatterns.com, A Sanborn Corporation PO Box 86747 Madeira Beach, FL 33738 Phone: 727-397-3073 Fax: 866-814-0525 Hours of Operation (USA Eastern Time) Monday to Friday 9 AM to 5 PM Features Projects: Free with Step by Step instructions. Wholesale accounts for Retailers, Instructions and bulk purchasing. All our pre cut glass has smooth edges eliminating the need for grinding and makes for safe handling. Create projects faster and more consistently with our quality precut glass. We accept Pay Pal & Major Credit Cards USPS & UPS are our primary shippers Product Search Page. Try the "Remember me" option for customer details to prefill checkout form on your next visit.

MOSAIC Glass Red, White & Blue Star Table

Materials List

See Category: Mosaic Glass Kit:

Item# 16202 (Qty 2) 2 Inch White Stars
Item# 96119 (Qty 5) 1 Inch White Stars 

Glass Supplies & Tools:
Item# 48017 Round Mosaic Table

Item# 41103 Weldbond Adhesive for Glass

Item #41904 0000 Steel Wool

Item# 41024 Black Grout 1 pound 

Item# 40196 Mosaic Nippers (Glass Tool)

· 1 Square Feet of Blue glass to be used for the star background. 

· 1 Square Feet of each Red & White glass to be used for the background Stripes. 

Print Pattern Below and increase to 3 times the size

Tip: 
You can make mosaic pieces by scoring the glass at ½” intervals and then breaking. Use mosaic nippers to create the mosaic pieces from the ½” strips. 

· Latex/rubber gloves
· Sponge
· Masking Tape
· Razor Blade or X-acto™ Knife

· Step 1: Prepare the Table Top 
Mix one part Weldbond glue with one part water. Coat the top of the table with the solution. This will provide a waterproof protective barrier between the wood table top and the mosaic pieces. This process prevents the wood from warping.

Step 4: Fill in Blue Star
Glue the 2” and 1” stars inside the large star drawn on the table top with Weldbond glue. Fill in remaining areas with the blue glass cut into chips. After the design is complete allow the project to dry for 24 hours. 

Step 5:  Fill in Background with Red and White Stripes
Cut the red and white glass into 1 3/8” strips. Fill in the background by alternating red and white strips as shown in the picture. Cut and fit one stripe at a time by laying the strip where it will be positioned and marking the strip where it should be cut to fit. Repeat until the background stripes are finished and glue. Grind if necessary.

Step 5 - Grouting
Place the project on newspaper. Mix grout with a small amount of water until the grout is the consistency of a thick milk shake. Spread the grout with your gloved hand and press grout into all crevices. Wait 10 minutes to allow the grout to set up.

Step 6 - Cleanup
Carefully wipe the grout with a lightly dampened sponge being careful not to pull grout out of the crevices. Rinse sponge frequently. Remember it is import the sponge be as dry as possible. After the excess grout has been removed allow the grout to dry for another 15 minutes. Use a soft cloth and ‘0000’ steel wool to clean the glass. Use a razor blade to remove spots of dried glue. 

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Projects: Free with Step by Step instructions.
• Wholesale accounts for Retailers, Instructions and bulk purchasing.
• All our pre cut glass has smooth edges eliminating the need for grinding and makes for safe handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.