HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Celtic Knots Pendant Set
 Fused Glass Jewelry

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

· Materials List for COE 90 or COE 96

· Fusible Glass Jewelry Pendant & Earring Set: 1 Inch Circle & 1/2 Inch Circle Black and Clear.

Note: Project can be done Black on Black versus Clear over Black, it will have a deeper color.  Same with white option.

EARRINGS:
COE 90 Item# 27137 Qty 1 Inch Circle Black & 1 Clear  

COE 96 Item# 96137  Qty 1/2 Inch Circle Black & 1 Clear

PENDANT:
COE 90 Item# 27133 Qty 1 Inch Circle Black & 1 Clear  

COE 96 Item# 96133 Qty 1/2 Inch Circle Black & 1 Clear  

Fusible Glass Decals:
Item# 41130 Celtic I Gold High Fire Decal

JEWELRY FINDING:
Item# 41114 Bail for Necklace
Item# 41118 Earring Post
Item# 41161 Earring Reinforce Discs
Item# 42006 Earring Wire Drop

Glass Jewelry Supplies:
Item# 41207 Triolyse Glue

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot

· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
 

Step 1:  Preparation
Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

 Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Cut out decals, remove tissue cover and set aside

Make sure to position each piece of glass evenly on top of the other and let sit for a few minutes.

Step 5:  Place into Kiln Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 6: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Attach the metal finding using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

Note: The earrings are are using Pierced Earring Reinforce Discs.  Glass earrings can be heavier than most earrings.  A single layer glass will not necessarily require earring reinforce discs but 2 layers would require reinforce discs to keep the hearing laying nicely on the ear and not sagging.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.