HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Fused Christmas Candy Dish

Materials List:

· Materials List for COE 90 (below) COE 96 

Item# 41183 7 1/4 Inch Round Mold
Item# 41075 Precut Circle 7 Inch
Item# 27105 Christmas Tree (2) 
(Project requires 2 packages of trees)
Item# 27139 Christmas Stocking (2)
Item# 27129 1 1/2 Inch Gingerbread
                          Man (3)
Item# 27119WH 1 Inch Star (3)
Item# 41033  Medium Glass Frit—Red
Item# 41028  Medium Glass Frit—White

· Materials List for COE 96 

Item# 41183  7 1/4 Inch Round Mold
Item# 96723  Precut Circle 7 Inch
Item# 96105  Christmas Tree (2) (Project requires 2 packages of trees)
Item# 96139  Christmas Stocking (2)
Item# 96129   1 1/2 Inch Gingerbread Man (3)
Item# 96119WH 1 Inch Star (3)
Item# 41047  Medium Glass Frit—Red
Item# 41042  Medium Glass Frit—White

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot

Miscellaneous Supplies
· Kiln Wash
· Elmer’s Glue
· Rubbing Alcohol, Dish Washing Liquid
· Cloth with very little lint
· 1 sq foot of Smooth Shelf Paper

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

OPTIONAL ASSEMBLY:  This project could be made using only glass glue.

Step 1: Preparation
Clean Glass: Using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

Prep Mold: Apply a good coat of kiln wash to the mold set aside to dry. 
Clean & Prep Kiln Shelf: Apply Kiln Wash (Shelf Primer) or cut an 8 inch square of shelf paper.

Step 2:  Position Glass: Spread Elmer’s glue in a scalloped design around the outer edge of the precut 7 inch circle. Cover with white frit and allow to dry. Once dry lift and turn over the precut circle to remove white frit that is not glued in the scalloped edge. 

Using just a tiny spec of Elmer's™ Glue , position pre-cut Christmas trees, stockings, and gingerbread men. White frit was also glued to the pre-cut shapes to imitate snow and decoration on the gingerbread men. Sprinkle red frit on the background being careful not to get any on the pre-cut Christmas decorations. 

Tip: It is important to note that you need to make sure to touch all glass pieces by the outer edges to avoid finger oil or prints on the surface of the glass. 

Step 3:  Place Project into Kiln: Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf. 

Step 4:  Tack Fuse Use the below tack fuse firing schedule.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Step 6: Prepare Kiln for Slump Process: Take the kiln shelf out of the kiln. Using the kiln posts, set the kiln washed mold in the middle of the kiln. Place the tack fused project on the mold.

Step 7: Slump Fuse: Use the below firing schedule to slump.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.