HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

BREAST CANCER AWARENESS 
           FUSED GLASS PIN
       

Materials List:

· Materials List for COE 90 or COE 96

· Fusible Glass Jewelry 1 3/4 Inch Large Oval in White.

Note: Project can be done on White or with Black glass option.

COE 90  Item# 27130WH
COE 96  Item# 96130WH

OPTION: Project in BLACK:

COE 90  Item# 27130BK
COE 96  Item# 96130BK

Pink Awareness Ribbon in Fusible Glass:

COE 90  Item# 27104
COE 96  Item# 96104

· Item# 41163 Pin Bar Gold Tone 1 inch

or

· 2 Tie-Tac Back, Clear Vinyl
  Item# 42008

Choose one of the following Tie-Tac backs:

· 2 Tie-Tac Squeeze Back
  Item# 42010

· 2 Tie-Tac Screw Back
  Item# 42009

Item# 41207 Triolyse Glue

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot

· Elmer's™ Glue · Solder 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Step 2 - Position Glass:  Using just a tiny spec of Elmer's™ Glue , position each Awareness Ribbon.  Make sure not to position too close to edges.

Tip: It is important to note that you need to make sure to touch all glass pieces by the outer edges to avoid finger oil or prints on the surface of the glass.

Step 3  - Place into Kiln: Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 5: Attach Tie-Tac or Pin Back.
It is important to judge the weight of the finished piece.  You may find that you should attach 2 Tie-Tacs so the weight of the glass piece will not pull a hole in the clothing.   Or if using one, you should attach approximately 1/3 rd of the way from the top of the glass pin so it will allow gravity to let the weight of the glass lay flat. 

Alternant choice:

Attach the Metal Pin Bar

Using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.