HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

DRAGON FLY DECORATIVE GLASS
       Mixed Art Glass Styles
  Fused Glass & Stained Glass

Materials List:

· Materials List for COE 90 or COE 96 

· Fusible Glass Clear Circle 
  (Pick desired size )
COE 90   Item# 41075 (7 Inch)
or
COE 90   Item# 90408 (11 Inch)

COE 96   Item# 96723 (8 Inch)
or
COE 96   Item# 96723 (10 Inch)

· Dragon Flies - 4 Glass colors

COE 90     

Item#: 27127B Dragonfly Blue
Item#: 27127G Dragonfly Green
Item#: 27127P Dragonfly Purple
Item#: 27127Y Dragonfly Yellow

COE 96    

Item#: 96127B Dragonfly Blue
Item#: 96127G Dragonfly Green
Item#: 96127P Dragonfly Purple
Item#: 96127Y Dragonfly Yellow

· Variety of stained glass colors for boarder.  

· Item# 14015 7/32”  Copper Foil
· Item# 41016 2 feet of Chain Nickel (Silver) Plated Ball Chain

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot

· Elmer's™ Glue · Solder 
· Fid or Lathkin to burnish the foil
· Flux & Brush
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Step 2 - Position Glass:  Using just a tiny spec of Elmer's™ Glue , position each Dragon Fly.  Make sure not to position too close to edges.

Step 3: - Add Decorative Glass:  Use Toothpick or plastic Cocktail fork to put 3 "tiny" drops of glue and evenly distributed for frit and noodles to adhere.

Step 4: It is important to note that you need to make sure to touch all glass pieces by the outer edges to avoid finger oil or prints on the surface of the glass.

Step 5  - Place into Kiln: Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.