|
Fused
Glass Chili Pepper Plate
Materials List for COE 90 or COE 96:
COE 90
Item#
41075 Qty 2
Fusible Glass Precut 7 inch Circle
Item#
27144 Qty 7 Chili
Peppers
COE 96
Item#
96723
Qty 2
Fusible Glass Precut 7 inch Circle
Item#
96144
Qty 7 Chili
Peppers FUSING
SUPPLIES:
Item#
41238
7
3/4 inch Rimmed Plate Mold
Item#
42017
Shelf
Paper 1 square foot
·
Kiln Wash or Hi-fire shelf paper
·
Elmer’s White Glue
·
Rubbing Alcohol, Dish Washing Liquid
·
Cloth with very little lint
Small Fused Project step-by-step instructions:
|
|
Step 1: Preparation
Clean Glass using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
Prep Mold: Apply a good coat of kiln
wash to the mold, set aside to dry.
|
|
Step 2: Full Fuse Plate Base Tip: It is important to note
that you need to make sure to touch all glass pieces by
the outer edges to avoid finger oil or prints on the
surface of the glass.
Stack the 7 inch precut circles on top of each
other on the kiln shelf paper/shelf and full fuse.
|
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened
until the next day so your project has had plenty of
time to anneal back to room temperature.
|
Step 3: Decorate
Base with Chili Peppers
Place chili peppers in a circle on top of the full fused base. Use Elmer’s glue to hold them in place and tack fuse.
|
|
SMALL/MEDIUM PROJECTS
· TACK FUSE |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
30 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened
until the next day so your project has had plenty of
time to anneal back to room temperature.
|
Step 4 - Prepare for Slump Process:
Take the kiln shelf out of the kiln. Using the kiln posts, set the kiln washed mold in the middle of the kiln. Place the tack fused project on the mold and slump fuse.
|
|
SMALL/MEDIUM PROJECTS
· SLUMP |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
7°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,430°F /
777°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
30 min. |
Hold Fire |
| Decrease/Temp |
3°F/
2°C |
750°F / 400°C |
1 min. |
DO NOT LOOK |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
| Take the kiln shelf out of the kiln. Using the kiln posts, set the kiln washed mold in the middle of the kiln. Place the tack fused project on the mold and slump fuse. |
GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass Patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
»»
Login Status
