HOME |Free Glass Projects |Fused Glass Supplies | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Dragonfly Pendant
Fused Glass Jewelry

(See Glass Tips & Tricks section: How to use Fusible Glass COLOR Decals)

Materials List:

Materials List for COE 90 or COE 96
 
COE 90 

Item# 90130  - 1 3/4 inch Large Oval in White or Ivory & Clear
Item# 90503 - Qty 1 Fusible Clear Dichroic Glass Dragonfly 1 1/8 inch
Item# 90206 - Qty 1 Light Green Zig Zag

COE 96:
Item# 96130  - 1 3/4 inch Large Oval in White or Ivory and Clear
Item# 96503  Qty 1 Fusible Clear Dichroic Glass Dragonfly 1 1/8 inch
Item# 96206 - Qty 1 Light Green Zig Zag

JEWELRY FINDING:
Item# 42053 Sterling Silver Plated Studded Bail

FUSING SUPPLIES:
Item# 33309 Dragonfly Decal (Colored, Glass or Ceramic Decal)
Item# 33310 Insect Set Decal (Colored, Glass or Ceramic Decal)
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue
Item# 41340 Fuser's Glue

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1:  Preparation
Clean Glass:  Using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

Clean & Prep Kiln Shelf: Apply Kiln Wash (Shelf Primer) or cut squares of shelf paper.

Step 2:  Place into Kiln Snap the glass zig zag glass into 3 different lengths.  Adhere to glass  base with Fuser's Glue and making sure the ends are right on the edge of the glass. Position the glass oval on top of the zig zags, lining up with the base oval glass with the top use a small spec of Fuser's Glue if necessary to hold them together.  Let dry 10 minutes.

Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 3: Full Fuse  

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Place decal in a small amount of clean water and using a pair of tweezers take the decal out of the water when it starts to curl about 10 seconds.  Slide off of the paper backing and place the Dragonfly Decal on the base larger of glass (we used the flowers as scrap from an Orchid decal) and then place the larger onto the surface of the clear glass, smooth out any air bubbles.  Allow to dry completely.

Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 5: Fast Tack Fuse for Decals  

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Attach the metal finding using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)  

GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.