|
Dichroic & Dicro Dazzler Fused Glass Ring
24k Gold Plated Adjustable Ring base
with pad & Glass Cabochon
Materials
List: for COE 90 or COE 96
COE 90:
Item# 90506
1/2 inch clear dichroic glass circle and a clear cap.
COE
96:
Item# 96506 1/2 inch
clear dichroic glass circle and a clear cap.
Glass Dicro Dazzlers you pick the colors
JEWELRY
FINDING:
Pick one:
Brushed texture adjustable Ring blank with Pad for Gluing
glass cabochon
Qty
1
Item#
33261 (Gold Plated)
Or
Pick from another ring design
FUSING
SUPPLIES:
Item#
41340
Fuser's Glue
Item#
42017
Shelf
Paper 1 square foot
Item#
41207
Triolyse
Glue
OTHER SUPPLIES:
Elmer's Glue
Rubbing Alcohol, Dish Washing Detergent
Cloth with very little lint (old T-shirt)
Small Fused Project step-by-step instructions:
Clean Up Supplies:
Rubbing Alcohol, Dish Washing Detergent
Cloth with very little lint (old T-shirt)
|
|
Step 1 - Preparation
Clean Glass:
using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
Clean & Prep Kiln:
Apply Kiln Wash (Shelf Primer)
Cut Shelf Paper to fit shelf
Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
|
|
Step 2: Prepare Glass Stack clear glass
cap on
top of Dichroic glass with a drop of Fuser's Glue. Let dry for 10 minutes.
|
|
Step 3: Place into Kiln Using Fingers around outer edges
of the fusible glass project or wear latex
gloves, pick up and place the project on the kiln shelf
paper/shelf. Leave a minimum of 1/2"
(13 mm) space between each project to ensure they do not
touch and fuse together.
Kiln Firing Process- Full Fuse
|
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
Step 4: Add Dicro Dazzlers Glass Using a tiny
spec of Elmer's glue, position each Dicro Dazzler, glass
jewel, in desired position on top of the fused glass
base glass. Let dry for 10 minutes. |
|
Step 5: Place into Kiln Using Fingers around outer edges
of the fusible glass project or wear latex
gloves, pick up and place the project on the kiln shelf
paper/shelf. Leave a minimum of 1/2"
(13 mm) space between each project to ensure they do not
touch and fuse together.
Kiln Firing Process- Tack Fuse
|
|
|
|
SMALL/MEDIUM PROJECTS
· TACK FUSE |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
10+ or 10-
Min. |
Observe |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
|
|
Step 6: Adhere Jewelry Finding
Clean glass and Ring Pad to remove any oils, dry and apply Triolyse glue to bail and
position on back of glass, centered. The glue with reach
it's maximum strength in 6 hours.
(Read
the Tips & Tricks for using Triolyse Glue)
Clean with rubbing alcohol. Do not resize ring
multiple time to avoid metal fatigue or breakage. |
GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
