HOME |Free Glass Projects |Fused Glass Supplies | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Dicro Dazzler Hair Pins
Gluing Glass Project

(See Glass Tips & Tricks section: How to use Dicro Dazzlers)

Materials List:

Qty Needed: 15 Dicro Dazzlers per finding
Glass Dicro Dazzlers

SUPPLIES & TOOLS:
Item# 41207 Triolyse Glue
Item# 42067 Bead Tweezers with Cup

GLASS JEWELRY FINDINGS:
Item# 33258 Barrette Clips Hair Finding with Locking Lip

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

SMALL: FREE FUSED GLASS PROJECT
Step-By-Step Instructions & Glass How To information

Step 1: Preparation - (This is the Most important step to remove oils) Clean the Finding settings using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

Step 2: Prepare the Glass Dicro Dazzlers - Pour out your Dicro Dazzlers onto a paper plate, most of them will natural roll and land Dichroic side down because it is slightly heavier and flat. Use separate paper plates for each color you want to use so they are easier to pour back in their storage zip top bag.

Using your Glass Bead Tweezers, turn over any needed to make sure the Dichroic side is down. 

Step 3:  Adhering glass to hair finding - Apply the Triolyse activator to the surface of the finding.  NOTE: run your brush over the lip of the bottle to remove excess before brushing on to finding.  Let the finding sit 3 to 5 minutes.

Light lay a piece of paper towel over the finding to absorb any excess activator.  Then carefully squeeze a few drops of the glue onto you paper plate.  Using your bead tweezers pick up a Glass Dicro Dazzler and dip the Dichroic side into the glue and then set into position.  It is helpful if you point the setting directly straight up and not at an angle to position the Dicro Dazzler.  Use a toothpick to spin the Dicro Dazzler until you are satisfied the Dichroic is sitting on the setting and it is displaying the most brilliance.

Move on to the next one and repeat the process.

Notes:  Once you start applying the glue, you must work fast until all the Dicro Dazzlers dots are  in position.  Also, it is best to start with the center settings and work your way outward. Clip the bobby pin to a flat surface to allow it to sit with the Dicro Dazzlers face up until dry.

The glue with reach it's maximum strength in 6 hours.
(Read the Tips & Tricks for using Triolyse Glue)

The next day test the settings by rocking you finger back and forth over the settings to insure you got a good bond and they are firmly in position. Clean the glass and hair pin finding with soap and water to remove any excess activator.

GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.