|
LOVE HEARTS
Night Light
Materials List
for COE 90 or COE 96
COE 90
Item#
90152 Clear Precut Night Light Base (Qty
1)
Item#90209
Qty 2 -1 1/4" Hearts Red
& Qty 2 -White
Item#90208
Qty 2 -1" Hearts
Pink
Item#
90137
Qty 4 -1" Tear Drop Earring White
COE 96
Item#
96152 Clear Precut Night Light Base (Qty
1)
Item#96136
Qty 2 -1 1/4" Hearts Red
& Qty 2 -White
Item#96208
Qty 2 -1" Hearts
Pink
Item#
96138 Qty 4 -1" Tear Drop Earring White FUSING
SUPPLIES:
Item#
42017
Shelf
Paper 1 square foot
Item#
41280
Night
Light Mold Set (This project uses the Tall shape)
STAINED
GLASS SUPPLIES:
Item#
48005
Night
Light kit
·
Kiln Wash or Hi-fire shelf paper
·
Elmer’s White Glue
·
Rubbing Alcohol, Dish Washing Liquid
·
Cloth with very little lint
SMALL: FREE FUSED GLASS PROJECT
Step-By-Step Instructions & Glass How To information
|
|
Step 1: Preparation - Clean Glass using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
Prep Mold: Apply a good coat of kiln
wash to the mold, set aside to dry.
|
|
Step 2: Position Glass - You can place the
hearts or follow our pattern, which was designed to
block the direct light and diffuse it. Use tiny dots of
Fuser's Glue to hold in place. Let dry 20
minutes before moving. |
|
Step 3: Full Fuse - Tip: It is important to note
that you need to make sure to touch all glass pieces by
the outer edges to avoid finger oil or prints on the
surface of the glass.
Place on top of the kiln shelf paper/shelf and full fuse.
|
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened
until the next day so your project has had plenty of
time to anneal back to room temperature.
|
Step 4: Prepare for Slump Process -
Take the kiln shelf out of the kiln. Using the kiln posts, set the kiln washed mold in the middle of the kiln. Place the
prepared fused project on the mold and slump fuse.
|
|
SMALL/MEDIUM PROJECTS
· SLUMP |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
7°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,430°F /
777°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
30 min. |
Hold Fire |
| Decrease/Temp |
3°F/
2°C |
750°F / 400°C |
1 min. |
DO NOT LOOK |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
Note: If you do not get a full slump, you can
ramp up another 5 degrees (never more than 20 degrees more) and never hold more than 20 minutes
at any temperature.
|
|
Step
5: Adding Night Light Clip
-
If possible, leave the kiln sit unopened until the
next day so your project has had plenty of time to
anneal back to room temperature and it is ready to use.
Use abrasives on any rough edges you need to smooth.
NOTE:
If using a glue on bail to hang the glass, clean
glass and dry.
Attach
the glass
hanger finding to the top backside of the
glass precut using the Triolyse glue. Maximum strength is reached after 6
hours.
(Read
the Tips & Tricks for using Triolyse Glue)
|
GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
