|
Fused Glass
Fall Suncatcher
Free Fusible Glass Project
Materials
List: for COE 90 or COE 96
COE 90:
Item#
90408 Qty 1
3 inch White or Clear Circle
Item# 90155 Qty
1 Each Pumpkin Oblong and Wide
Item# 90122 Qty
2 Ivy Leaves
Item # 90405 Mardi
Gras Confetti Glass Multi Color
COE
96:
Item#
96723 Qty 1 3 inch White Circle
Item#
96155 Qty 1
Each Pumpkin Oblong and Wide
Item# 96122 Qty 2
Ivy Leaves
Item # 96706 Mardi
Gras Confetti Glass Multi Color
GLASS HANGER:
Item#
41317 Qty 1 Glass Hanger Small Nickel Plated
FUSING
SUPPLIES:
Item#
41181
High Temp 17 Gauge Wire
Item#
41340
Fuser's Glue
Item#
42017
Shelf
Paper 1 square foot
Item#
41207
Triolyse
Glue
OTHER SUPPLIES:
· Elmer's™ Glue
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
Small Fused Project step-by-step instructions:
Clean Up Supplies:
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
|
|
Step 1 - Preparation
· Clean Glass:
using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
· Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
|
|
·
Step 2: Put Glass project together
Position the pumpkins first. Coil the wire and
position under one pumpkin. Position leaves, covering
one end of the coiled wire. Use Fuser's Glue
to hold each in place and let dry. Coat the area
where you want the confetti glass to be placed with
Fuser's Glue.
Let
dry for at least 20 minutes before moving.
|
|
·
Step 3: Place into Kiln Using Fingers around outer edges
of the fusible glass project or wear latex
gloves, pick up and place the project on the kiln shelf
paper/shelf. Leave a minimum of 1/2"
(13 mm) space between each project to ensure they do not
touch and fuse together.
·
Step 5: Kiln Firing Process- Full Fuse
|
|
SMALL/MEDIUM PROJECTS
· TACK FUSE |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
20 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened
until the next day so your project has had plenty of
time to anneal back to room temperature and it is
ready to use.
·
Step 4: Adding Jewelry Findings
Attach
the metal finding using the Triolyse glue. Make sure
the glass is clean and dry and when placing it on the
center, back side. Maximum strength is reached after
6 hours. (Read
the Tips & Tricks for using Triolyse Glue)
|
GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
