HOME |Free Glass Projects |Fused Glass Supplies | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Cherry Blossom Frit Pendant
Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

(See Glass Tips & Tricks section: How to cast glass Frit)

Materials List for COE 90 & 96:

COE 90:
Item # 41028 Glass Frit White
Item # 90420 Glass Frit Water Clear Medium

COE 96:
Item # 41043 Glass Frit White Opaque Medium
Item # 96735 Glass Frit Water Clear Medium
Item # 41110 Glass Frit Mauve Clear Medium

FUSING SUPPLIES:
Item# 41428 Glass Casting Jewelry Square Mold
Item# 41341 2 Kiln Posts
Item# 41433 Mold Cleaning Brush
Item# 41246 Primo Primer
Item# 41336 Hake Brush (for Primer application)
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue
Glass Decal:
Item# 41389 Low Fire 22K Cherry Blossom Fusible Decal

GLASS JEWELRY FINDINGS:
Item# 41114 (Gold) Bail 

Other Materials:
Item# 41325 Safety Glasses
Item# 41343 Kiln Gloves
Item# 48025 Diamond Polishing Pads
or
Item# 48050 Abrasive Stone
· Hair Dryer 
· Dusk Mask 
· Small Paint Brushes
· 3M™ Diamond Coated Sanding Sponges

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

SMALL: FREE FUSED GLASS PROJECT
Step-By-Step Instructions & Glass How To information

Step 1 - Preparation
· Clean bail:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln & Mold: 
    · Apply Kiln Wash (Shelf Primer) to Mold. Use blow dryer in-between coats or air dry.  (Note: You should re-apply primer after each firing and use a stiff bristle brush to remove previous spent primer.)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln 

Fill mold with frit until it is in a mound above he mold.  Use a small brush to pull frit down from the sides toward the middle before fusing. (This keeps the frit from sticking to the sides of the mold while fusing.)
 

Step 3:  Place into Kiln - Place mold on kiln posts in kiln; this will ensure an even flow of heat around the entire mold. Fuse using the firing schedule below:  

Step 4: Kiln Firing Process- Full Fuse Glass Casting 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Step 6: Kiln Firing Process- Low Fire 22K Gold Decal 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Clean glass, dry and apply Triolyse glue to bail and position on back of glass, centered. The glue with reach it's maximum strength in 6 hours.
(Read the Tips & Tricks for using Triolyse Glue)

GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.