|
Step 1: Preparation
Clean Glass: Using Alcohol or Dish Washing Detergent.
Then dry and set aside on a clean piece of paper or
cardboard.
Clean & Prep Kiln Shelf: Apply Kiln Wash (Shelf Primer)
or cut squares of shelf paper.
Step 2: Assemble Glass
Cut 1 of
each color 1/2 square to make smaller squares
Using just
a tiny spec of
Fuser's Glue
and position
1 of each of the 1/2 inch colors onto the clear base.
Then take some of the smaller cut colors and place them
on top of an oposing color. Repeat with the
smallest size. Let
sit for at least 10 minutes before moving.
Step 3: Place Project into Kiln
Using Fingers around outer edges of the fusible glass
project or better yet wear latex gloves, pick up and
place the project on the kiln shelf paper/shelf.
Step 4: Full Fuse |
