Fused Glass Coyote Night Light

(See Glass Tips & Tricks section: How to use Dicro Slide)

Overview: Classified as an Easy, 1 Fire Project & a Low Cost Glass Project

Materials List For COE 90 & 96:

COE 90 
Item# 90408 3 inch Qty 1 Clear Circle
Item# 90185 Coyote Qty
Item # 41034 Glass Frit Jade

COE 96 
Item# 96723 3 inch Qty 1 Clear Circle
Item# 96185 Coyote
Item # 96422 Glass Frit Teal Green

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot
Item# 41340 Fuser's Glue
Dicro Slide ™ (Dicro Paper) We use Item# 33020 (Blue/Gold)

STAINED GLASS SUPPLIES:
Item# 48005 Night Light kit

· Kiln Wash or Hi-fire shelf paper
· Elmer’s White Glue
· Rubbing Alcohol, Dish Washing Liquid
· Cloth with very little lint

Small Fused Project step-by-step instructions:

Step 1:  Preparation
· Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and/or Shelf Paper into Kiln

Step 2:  Prepare Glass
- Using the Fuser's Glue cover the surface of the Glass circle and wolf and moon.  Then sprinkle the glass frit over the cirle. Let dry for at least 10 minutes do not move, it may take 30 minutes or longer for the glue to completely dry and hold the frit in place.

Once it is dry, turn the glass circle up side down and tap on the back to get rid of any excess frit and make sure to brush it off the wolf and moon.

(See Glass Tips & Tricks section: How to use Dicro Slide)

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Make sure the glass and the night light clip are clean and dry and before applying adhesive.  Place the clip on the center, back side along the bottom edge of the glass circle.  Attach the Metal Night Light Clip using the Triolyse glue. We suggest using small clips or even clothes pins to hold the clip in place while drying. Maximum strength is reached after 6 hours.  (If you are using E6000 Adhesive, maximum strength is 24 hours and it is important to clean up any excess immediately.)

(Read the Tips & Tricks for using Triolyse Glue)

Tip: If you are having trouble getting the clip to attach and you are sure the glass and clip are clean it is most likely you need to scuff up the surface of either the metal and/or the glass where you are attaching the clip to provide a surface in order for the glue to bond.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.