HOME |Free Glass Projects |Fused Glass Supplies | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

	SIDE VIEW
	PREPARATION

3D Glass Butterfly Pendant
Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

Materials List for COE 90 & 96:

COE 90:
Item# 90503 Qty 2 Fusible Dichroic Glass Butterfly 1 1/8 inch (we used 1 clear and on black glass)
Item# 41069 Mardi Gras Mixed Bag of Noodles & Stringers
Optional Full Tubes of each Noodles/Stringers available Click Here

COE 96:
Item# 96503  Qty 2 Fusible Dichroic Glass Butterfly 1 1/8 inch (we used 1 clear and on black glass)
Item# 41066 Mardi Gras Mixed Bag of Noodles & Stringers
Optional Full Tubes of each Noodles/Stringers available Click Here

FUSING SUPPLIES:
Item# 41313 Hi Fire Platinum Leopard Decal
or Gold Item# 41312
Item# 42017 Shelf Paper 1 square foot
Item# 41191 Fiber Paper 1/8 inch thick
Item# 41207 Triolyse Glue

GLASS JEWELRY FINDINGS:
Item# 41115 (Silver) Small Bail  

Other Materials:
Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

SMALL: FREE FUSED GLASS PROJECT
Step-By-Step Instructions & Glass How To information

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln 

Stack the Dichroic Butterfly on top of the clear glass making sure the butterflies line up.

Step 3:  Place into Kiln - Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.  

Step 4: Kiln Firing Process- Slump Fuse 

Note: If you do not get a full slump, you can ramp up another 5 degrees (never more than 20 degrees more) and never hold more than 20 minutes at any temperature.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Clean glass, dry and apply Triolyse glue to bail and position on back of glass, centered. The glue with reach it's maximum strength in 6 hours.
(Read the Tips & Tricks for using Triolyse Glue)

GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.