|
Sparkling
Pink Spirit
Glass Heart
Fused Glass Jewelry
(See Glass Tips & Tricks section:
How to use Fused Glass Enamel Paints)
Materials List for COE 90 or COE 96
COE 96 Item#
96177 Qty 1 Each (1 1/2 inch Spirit
Glass Heart & Clear
Heart)
Glass Jewelry
Finding:
Item#
42052
Silver
Plated Moroccan Bail
FUSING SUPPLIES:
Item#
41403
Fused Glass Sparkle Paint White
Item#
41402
Fused Glass Enamel Paint Medium
Item#
41377
Paint Sifter
Item#
42017
Shelf
Paper 1 square foot
Item#
41207
Triolyse
Glue
· Elmer's™ Glue
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder
· Abrasive Stone
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges
Small Fused Project step-by-step instructions:
Clean Up Supplies:
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
|
|
Step
1 - Preparation
· Clean Glass & Metal Inclusion using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
· Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
|
|
Step 2: Adding Fused Glass Sparkle Enamel Paint
Using a paint brush, apply a thin coat of
Glass
Enamel Paint Medium to the surface of the Clear Glass.
Then using
the small sifter, sift the a thin coast of the glass
enamel sparkle paint over the surface. Let dry 10
minutes.
Position the clear glass heart centered over the
spirit glass heart. |
|
Step 3: Place into Kiln Using Fingers around outer edges
of the fusible glass project or better yet wear latex
gloves, pick up and place the project on the kiln shelf
paper/shelf. Leave a minimum of 1/2"
(13 mm) space between each project to ensure they do not
touch and fuse together.
|
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened
until the next day so your project has had plenty of
time to anneal back to room temperature and it is
ready to use.
|
|
Step 4: Adding Bail
Clean glass, dry and apply Triolyse glue to bail and
position on back of glass, centered. The glue with reach
it's maximum strength in 6 hours.
(Read
the Tips & Tricks for using Triolyse Glue)
|
|
|
GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass Patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
»»
