|
Fused Glass Tic Tac Toe Game Board
The Perfect Custom Gift
Materials List for COE 90 or COE 96:
COE 90
Item#90404
Qty
1
Red Fusible Glass 6 x 6 inches
Item#90402
Qty
1
Clear Fusible Glass 6 x 6 inches
Item#90173
Qty
2 packs of Black & White & Qty 4 packs of Clear 1 1/2
inch circles
Item#90133
Qty
2
packs of Red 1 inch Circles
Item#41067
Qty
1
Mardi Gras Glass Noodle Tube
(We used Red and Yellow Noodles)
COE 96
Item#96404
Qty 1
Red
Fusible Glass 6 x 6 inches
Item#96402
Qty 1
Clear Fusible Glass 6
x 6 inches
Item#96173
Qty
2
packs of
of Black &
White & Qty 4 packs of Clear 1 1/2 inch circles
Item#96133
Qty
2
packs of Red 1 inch Circles
Item#41064
Qty
1
Mardi Gras Glass Noodle Tube
(We used Red and Yellow Noodles)
FUSING
SUPPLIES:
Item#
42017
Shelf
Paper 1 square foot
Item#
41340
Fuser's Glue |
|
OTHER SUPPLIES:
· Elmer's™ Glue
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
Small Fused Project step-by-step instructions:
Clean Up Supplies:
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
Step 1: Preparation
· Clean Glass:
using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
· Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
|
|
Step 2 – Full Fuse Game Board and Pieces
Using a tiny drop of Fuser's Glue and stack the Clear
Square on top of the Red and then stack 1 clear circle
on top of each white and black circle.
Tip: It is important to note
that you need to make sure to touch all glass pieces by
the outer edges to avoid finger oil or prints on the
surface of the glass and
make sure
they are about 1/2 inch apart on the kiln shelf. |
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
Step 3 - Add Glass Details
Using small drops of Fuser's Glue
position the Yellow vertical noodles on the red square
and then apply the horizontal noodles. Then
apply Fuser's Glue to the tops of the black circles only and
break the red noodles in even lengths and position them
as Xs. Place the Red 1 inch Circles, centered on
top of the white Circles.
Place project on shelf paper or prepared kiln shelf and tack fuse. |
|
SMALL/MEDIUM PROJECTS
· TACK FUSE |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
30 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible,
leave the kiln sit unopened until the next day so your
project has had plenty of time to anneal back to room
temperature. Place mold on small kiln posts to it is
elevated slightly in the kiln. This allows for proper
air flow around the mold during the slumping process.
Place project on mold and slump using the below
schedule.
|
GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass Patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
