HOME |Free Glass Projects |Fused Glass Supplies | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

	Preparation before Firing in Kiln
	Backside Attach Findings and rubber band
	Close up of Finished Napkin Rings

Thanksgiving Day Glass Napkin Rings

Materials List for COE 90 or COE 96:

COE 90
Item#90401  Qty 1 White Fusible Glass 6 x 6 inches 
Item#90170  Qty 1 Leaf Maple
Item#90172  Qty 1 Leaf Oak
Item#90155  Qty 1 Pumpkin Round
Item#90154  Qty 1 Pack of 3 Small Footballs
Item#90137  Qty 1 Small Dark Amber 1/2 inch circle
Item#90141  Qty 1 Small White Tear Drop
Item# 41069  Mardi Gras Pack of Mixed - Noodles & Stringers

COE 96
Item#96401  Qty 1White Fusible Glass 6 x 6 inches
Item#96170  Qty 1 Leaf Maple      
Item#96172  Qty 1 Leaf Oak
Item#96155  Qty 1 Pumpkin Round
Item#96154  Qty 1 Pack of 3 Small Footballs
Item#96137  Qty 1 Small Dark Amber 1/2 inch circle
Item#96141  Qty 1 Small White Tear Drop
Item# 41066  Mardi Gras Pack of Mixed - Noodles & Stringers

FUSING SUPPLIES:
Item# 41340 Fuser's Glue
Item# 41207 Triolyse Glue
Item# 41247 Glass Drape mold- - Barrette, Pony Tail or Napkin Ring
Item# 42017 Shelf Paper 1 square foot

Optional Glassline Fusible Paints Your choice of coordinated colors to use as accents

GLASS JEWELRY FINDINGS & SUPPLIES:
Item# 33279 Qty 8 Hair Finding: Ponytail Glue on Finding

OTHER SUPPLIES:
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1: Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Step 2 – Prepare Glass
Cut 6 x 6” white glass squares into 4 rectangles of 3 inches x 2 1/2 inches. Run a grinder over all sides and round the corners.

Step 3 – Assemble Glass:  Using Fuser's Glue, apply a tiny drop of glue to each precut and center it on each white base glass rectangle.  Then break stringers for each precut and using a tiny drop of Fuser's Glue to position.  Let dry before moving.

If so desired, decorate with colors from Glassline paints.  Let dry.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Note: If you do not get a full slump, you can ramp up another 5 degrees (never more than 20 degrees more) and never hold more than 20 minutes at any temperature.

Step 6 Adding Jewelry Findings

Using a pair of needle nose pliers, bend arm over rubber hair band and attach the metal finding using the Triolyse glue to the center inside of of the glass.  Wait until adhesive has reached full strength and repeat for opposite side.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)  

GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.