HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Gold Glass Christmas Beveled Ornament
with Gold Accents
(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

Materials List:

GLASS BEVEL Predrilled
Item# 41304 - Diamond Beveled Glass Ornament

FUSING SUPPLIES:
Item# 41325 - Low Fire 22k Sampler  Glass Decal
Item# 42017 Shelf Paper 1 square foot

Other Materials:
Item# 42000 – Suction Cup - Large
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Etched Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Cut out Gold Boarder Decals, make sure to remove tissue paper & set aside.
Note: It is important to follow the instructions that come with your decals! Keeping you glass free of oil from your fingers is important.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

 Step 2: Prepare Project for Decals
Take the Decals and soak in distilled water for 20 to 30 seconds. Slide and apply to the front side of the glass to desired locations.  Smooth out any air bubbles.

It is very important to make sure the decals are completely dry before firing in the kiln as to avoid them steaming off the glass.  So ideally, leave them dry over night.

Step 3:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 4: Kiln Firing Process- Low Fire 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

If possible, leave the kiln sit unopened until the next day so your project has had plenty of time to anneal back to room temperature  and it is ready to use.

Clean Glass and Hang using Suction cup or thread with ribbon or clear fishing line.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.