Prepared Before Fusing

Fused Glass Dragonfly Night Light

Creating Glass Lace see our Tips and Tricks on Glass
How To Techniques.

Overview: Classified as an Easy, 1 Fire Project & a Low Cost Glass Project

Materials List For COE 90 & 96:

COE 90 
Item# 90408 3 inch Qty 1 Clear Circle
Item# 27127 Dragonfly (Qty 1 you pick the color)
Item # 41028 Glass Frit White to make Glass Lace

COE 96 
Item# 96723 3 inch Qty 1 Clear Circle
Item# 96127 Dragonfly (Qty 1 you pick the color)
Item # 41043 Glass Frit White to make Glass Lace

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot
Item# 41340 Glastac Adhesive

STAINED GLASS SUPPLIES:
Item# 48005 Night Light kit

· Kiln Wash or Hi-fire shelf paper
· Elmer’s White Glue
· Rubbing Alcohol, Dish Washing Liquid
· Cloth with very little lint

Small Fused Project step-by-step instructions:

Step 1:  Preparation
· Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

- Create your Glass Lace.  See our Tips and Tricks on Glass How To Do Techniques.

- Using the Glastac Adhesive cover the surface of the Clear Glass Circle.  Then position the dragonfly as desired and then lay pieces of your glass lace over the clear areas. Let dry for at least 10 minutes do not move.

Tip: Because this is a nightlight you want to keep the light bulb from being to glaring so cover the surface of the clear generously with your glass lace, especially since the dragonfly is transparent.
 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and/or Shelf Paper into Kiln

Tip: It is important to note that you need to make sure to touch all glass pieces by the outer edges to avoid finger oil or prints on the surface of the glass.

Place on top of the kiln shelf paper/shelf and full fuse.  

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Make sure the glass and the nigh light clip are clean and dry and before applying adhesive.  Place the clip on the center, back side along the bottom edge of the glass circle.  Attach the Metal Night Light Clip using the Triolyse glue. We suggest using small clips or even clothes pins to hold the clip in place while drying. Maximum strength is reached after 6 hours. 

(Read the Tips & Tricks for using Triolyse Glue)

Tip: If you are having trouble getting the clip to attach and you are sure the glass and clip are clean it is most likely you need to scuff up the surface of either the metal and/or the glass where you are attaching the clip to provide a surface in order for the glue to bond.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.