HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Fused Scrap Glass Bowl
Fusible Glass Project

Materials List For COE 90 & 96:

COE 90 
Item# 90000 Scrap Glass (Available in multiple colors, we used Clear as the base, with amber, Spring Green and red accents and some stringers and noodles)

Optional:
Item# 90408  Qty 1 of 7 inch Clear or White Circle for Base
Item# 41069  Mardi Gras Pack of Mixed - Noodles & Stringers
Item# 90405  Mardi Gras Confetti Glass Multi Color
 

COE 96
Item# 96000 Scrap Glass (Available in multiple colors, we used Clear as the base, with amber, Spring Green and red accents and some stringers and noodles)

Optional:
Item# 96722  Qty 1 of 7 inch Clear or White Circle for Base
Item# 41066  Mardi Gras Pack of Mixed - Noodles & Stringers
Item# 96706  Mardi Gras Confetti Glass Multi Color

FUSING SUPPLIES:
Item# 41183  7 1/4 Inch Round Mold
Item# 42017 Shelf Paper 1 square foot

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Place the bowl mold upside down on a piece of thin fire and using a pencil draw around it onto the thin fire.

Place the thin fire onto the kiln shelf, positioned in the kiln.

Assemble the glass in the kiln.  Lay out the scraps for the base glass as desired making sure to contain it inside the circle.  Layer the clear on the bottom and make sure to over lap so you do not have any gaps or holes.  Then layer the colored glass over the clear base and make sure to overlap edges.

Note: You can use tiny specs of Elmer's glue to hold position of glass as needed.

Let parts dry for at least 10 minutes to make sure they do not move.

Step 4:  Place into Kiln   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Step 6: Slumping Process- Grind any edges that are rough, or any that might hang over the edges of the mold.  Clean glass and Place it on the kiln washed mold in the kiln and centered over it.

Note: If you do not get a full slump, you can ramp up another 5 degrees (never more than 20 degrees more) and never hold more than 20 minutes at any temperature.

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.