|
Fused Glass Jewelry
Oriental Symbol Glass Pendant
(See
Glass Tips & Tricks section:
How to use Fusible Glass Decals)
Materials
List
COE 90 or COE 96
COE 90
Item#
27133
1 inch Circle
(1 Red & 1 Clear)
Item#
27142
3/4 x 3/8 inch Oval Oblong (1 Black)
COE 96
Item# 96133
1 inch Circle
(1 Red & 1 Clear)
Item#
96142
3/4 x 3/8 inch Oval Oblong (1 Black)
FUSING
SUPPLIES:
Item#
42017
Shelf
Paper 1 square foot
JEWELRY
FINDING:
Item#
41116
Small
Gold Bail Glass
Supplies & Tools:
Item#
41207
Triolyse
Glue
Item#
41122
Fusible Glass Decal 22 K Gold Characters
or
Glass
Decal Category
Other Decals
Other
Materials:
· Elmer's™ Glue
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder
· Abrasive Stone
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges
Small Fused Project step-by-step instructions:
Clean Up Supplies:
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
|
|
Step 1 - Preparation
· Clean Glass using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
· Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
Cut
out the Character Decal of choice
and set aside. |
Step 2: Put Glass project together
Use a
"tiny" spec of Elmer's glue, on edged only, to adhere the
clear to the black oblong oval and the oval to the red
base, making sure they are centered.
|
|
Step 3: Place into Kiln - Using Fingers around outer edges
of the fusible glass project or better yet wear latex
gloves, pick up and place the project on the kiln shelf
paper/shelf.
Step 4: Kiln Firing Process- Full Fuse
|
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
Step 5: Apply Decal - Cut out the dragon
flies desired. Remove tissue cover, soak in water
20 seconds and slide onto the surface of the glass
pendant. Make sure to remove all air bubbles and
let complete dry before putting into kiln. |
|
Step 6: Fuse Low Fire Decal
|
|
SMALL/MEDIUM PROJECTS
· LOW
FIRE DECAL |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
2+ or 2-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
Step 7: Finish Project
-
Clean glass, dry and apply Triolyse glue to bail and
position on back of glass, centered. The glue with reach
it's maximum strength in 6 hours.
(Read
the Tips & Tricks for using Triolyse Glue)
|
GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass Patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
»»
Login Status
