HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

	Prepared to Fire & Painting on Back Side

3D Glass Lady 1 1/2 inch Pendant
Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

Materials List for COE 90 & 96:

COE 90:
Item# 27100 Qty 1 -1 1/2 inch Black Circle
Item# 90300 Qty 1 -1 5/8 inch Clear Cap Circle

COE 96:
Item# 96100 Qty 1 -1 1/2 inch Black Circle
Item# 96300 Qty 1 -1 5/8 inch Clear Cap Circle

FUSING SUPPLIES:
Glass Paints:
Item# 41326 Multipen Liquid Enamel Paints
(We used Rose, Bright Yellow and Bright Purple)

Decals: High Fire
Item# 41122 Gold Celtic 2 Fusible Decal
or
Item# 41215 Platinum Celtic 2 Fusible Decal

Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

GLASS JEWELRY FINDINGS:
Item# 41116 (Gold) Necklace Bail 
or option
Item# 41115 (Silver) Necklace Bail 

Other Materials:
Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

SMALL: FREE FUSED GLASS PROJECT
Step-By-Step Instructions & Glass How To information

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Place Oval on backside of Decal and trace around it with a pencil. Cut the  Decals, remove the tissue paper & set aside.
Note: It is important to follow the instructions that come with your decals! Keeping you glass free of oil from your fingers is important.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Step 3: Painting the Glass  Use fine or angle brushes apply your paint colors to the back side of the clear glass using the decal as an outline and painting within the lines. Note: Dark colors used on a black background may not display.

Let dry for at least 20 minutes before moving piece. 

Step 4: Put Glass project together  Flip over the clear glass making sure that the decal side is up and then place on top of the black glass base.  Make sure the clear cap is aligned with the black glass base.

Step 5:  Place into Kiln - Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.  

Step 6: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Clean glass, dry and apply Triolyse glue to bail and position on back of glass, centered. The glue with reach it's maximum strength in 6 hours.
(Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.