Full Fuse - Before Slumping

Fused Glass Night Light
Flower Power

Materials List For COE 90 & 96:

COE 90 
Item# 90151 Clear Night Light Blank
Item# 90166 Yellow & Orange Flower (Qty 1 each)
Item # 41032 Glass Frit Yellow
Item # 41033 Glass Frit Red
Item # 41031 Glass Frit Green

COE 96 
Item# 96151 Clear Night Light Blank
Item# 96166 Yellow & Orange Flower (Qty 1 each)
Item # 41048 Glass Frit Yellow
Item # 41047 Glass Frit Red
Item # 41045 Glass Frit Green

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot
Item# 41280 Night Light Mold Set (This project uses the Fan shape)

STAINED GLASS SUPPLIES:
Item# 48005 Night Light kit

· Kiln Wash or Hi-fire shelf paper
· Elmer’s White Glue
· Rubbing Alcohol, Dish Washing Liquid
· Cloth with very little lint

Small Fused Project step-by-step instructions:

Step 1:  Preparation
· Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

- Using a tiny spec of Elmer’s Glue position each flower on Clear Night Light Base. Let dry for at least 10 minutes or until flowers do not move.

- Using a thin layer of Elmer’s Glue paint the stem and sprinkle with green frit.  Let dry 10 minutes and then turn upside down over a paper plate in order to recycle any that is loose.

- Repeat for Red Frit on Yellow flower and Repeat for Yellow frit on Orange Flower.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Prep Mold: Apply a good coat of kiln wash to the mold, set aside to dry.

Tip: It is important to note that you need to make sure to touch all glass pieces by the outer edges to avoid finger oil or prints on the surface of the glass.

Place on top of the kiln shelf paper/shelf and full fuse.  

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Note: If you do not get a full slump, you can ramp up another 5 degrees (never more than 20 degrees more) and never hold more than 20 minutes at any temperature.

Make sure the glass is clean and dry and when placing the clip on the center, back side along the bottom edge.  Attach the Metal Night Light Clip using the Triolyse glue. We suggest using small clips or even clothes pins to hold the clip in place while drying. Maximum strength is reached after 6 hours. 

(Read the Tips & Tricks for using Triolyse Glue)

Tip: If you are having trouble getting the clip to attach and you are sure the glass and clip are clean it is most likely you need to scuff up the surface of either the metal and/or the glass where you are attaching the clip to provide a surface for the glue to bond.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.