HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Yellow Flowered Coaster
Fusible Glass Project

Materials List For COE 90 & 96:

COE 90 
Qty 1 Item# 90408 4 inch Clear Circle
Qty 1 Item# 27166 Yellow Flower
Qty 1 Item# 90406 White Medium Glass Frit

COE 96
Qty 1 Item# 96723 4 inch Clear Circle
Qty 1 Item# 96166 Yellow Flower
Qty 1 Item# 96708 White Medium Glass Frit

Glass Frit & More - Mardi Gras Pack of Mixed - Noodles & Stringers

COE 90 Item# 41069
COE 96 Item# 41066

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot

STAINED GLASS SUPPLIES:
Item# 42021 Surface Guards / Self Adhesive Vinyl Bumpers

COE 96 Glass Pebbles
Item# 96718 Sky Blue Pebbles

FOR COE 90 create your own colored glass nuggets by using:
Item# 27133 1/2 inch blue circles, use 2 or 3 stacked for each nugget
Or you could use clear circles and Blue Enamel paints or Glass Line paints on the back of the glass to color it.
Glass Line Paints:
Item# 41267 Turquoise

Multipen Enamels
Item# 41326  Mix Bright Blue and White

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Let parts dry for at least 10 minutes until they do not move.

Then turn upside down over a paper plate or towel to remove excess frit and place it back into container.

Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 5: Kiln Firing Process- Tack Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Step 5: Add Pads
Clean and make sure the glass is very dry.  Peel off 4 surface guards and position even on the back side, outer edge of the glass.  The coaster is now ready to use.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.