|
Fused Glass Christmas Stocking
Materials
List:
Materials List for COE 90 or COE 96
COE 90
Item#
27139
- Christmas Stocking Pre-cut Glass Kit
Item#
27163 - Christmas Stocking Pre-cut Glass
Blank
Item#
27112 -
Holly Cluster
COE 96
Item#
96139
- Christmas Stocking Pre-cut Glass Kit
Item#
96163 - Christmas Stocking Pre-cut Glass
Blank
Item# 96112 -
Holly Cluster FUSING SUPPLIES:
Item#
42017
Shelf
Paper 1 square foot
Findings:
Qty
1
Item# 41116 Glass Hanger Small Gold Plated
Other Items:
Qty
1
Item# 41165 E6000 Glue 3.7oz
Miscellaneous Items:
Elmer's Glue
Rubbing Alcohol, Dish Washing Detergent
Cloth with very little lint (old T-shirt)
Cold Polishing - (one of the following)
Grinder
Abrasive Stone
Diamond Nail File
3M Diamond Coated Sanding Sponges
|
|
Step 1 - Preparation
Clean Glass: Using Alcohol or Dish Washing Detergent.
Then dry and set aside on a clean piece of paper or
cardboard.
Clean & Prep Kiln Shelf: Apply Kiln Wash (Shelf Primer)
or cut 2 - 4 x 5 inch squares of shelf paper. One for
the full fuse and one for the tack fuse.
Step 2 – Assemble Christmas Stocking
Using just
a tiny spec of Elmer's™ Glue, position the pre-cut
Christmas Stocking top and bottom of the pre-cut
stocking base.
Step 3 - Place Project into Kiln
Using Fingers around outer edges of the fusible glass
project or better yet wear latex gloves, pick up and
place the project on the kiln shelf paper/shelf.
Step 4 – Full Fuse |
|
SMALL PROJECTS ·
FULL FUSE ·
2 LAYERS |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
30°F/
18°C |
1,000°F /
535°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,400°F /
815°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
590°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
10 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
Step 5 – Add Holly Cluster
If possible, leave the kiln sit unopened until the next
day so your project has had plenty of time to anneal
back to room temperature. Using just a tiny spec of
Elmer's™ Glue, position the holly leaves and berries as
desired.
Step 6 - Place Project into Kiln Tack Fuse
Using Fingers around outer edges of the fusible glass
project or better yet wear latex gloves, pick up and
place the project on the kiln shelf paper/shelf.
|
|
|
SMALL/MEDIUM PROJECTS
· TACK FUSE |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
30 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened until the next
day so your project has had plenty of time to anneal
back to room temperature.
Step 7 -
Step Glue Jewelry Bail for Hanging
Use
E6000 Glue
or an epoxy glue to glue the jewelry bail to the
back of the Christmas stocking. Allow about 24 hours
for the glue to dry before handing. |
|
|
|
|
GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass Patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
»»
Login Status
