HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Dark Amber Pendant set
Fusible Glass Jewelry Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

(See Glass Tips & Tricks section: How to use Dicro Slide)

Materials List for COE 90 or COE 96

Fusible Glass Jewelry Pendant & Earring Set: 

EARRINGS:
COE 90 
Item# 27137 (4) Clear & (4) Amber

COE 96 
Item# 96137  (4) Clear & (4) Amber

PENDANT:
COE 90 
Item# 27133 (1) Amber & (1) Clear 

COE 96 
Item# 96133 (1) Amber & (1) Clear

DICRO SLIDE tm:
Item# 41153 Cyan Copper

JEWELRY FINDING:
Item# 41116 (1) Pendant Gold Bail - Small
Item# 41206 (2) Pierced Earring Gold Post with drop Loop
Item# 41161 (2) Pierced Earring Reinforced Backs
Item# 41192 (2) Gold Tone Earring Bail Offset
Item# 42011 (2) Gold Jump Rings 

FUSING SUPPLIES:
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
Elmer's Glue 
Rubbing Alcohol, Dish Washing Detergent
Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

Rubbing Alcohol, Dish Washing Detergent
Cloth with very little lint (old T-shirt)

Step 1 - Preparation
Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

Using scraps or cut out odd shapes Dicro Slide tm and trim to fit the glass and set aside.

Clean & Prep Kiln: 
    Apply Kiln Wash (Shelf Primer)
    Cut Shelf Paper to fit shelf
    Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

Step 2: Prepare Project for Dicro Slide
Take the Dicro Slide pieces and soak in distilled water for 20 to 30 seconds. Slide and apply to the top side of the glass dark amber glass shapes, remove any air bubbles and then stack the clear glass on top.

             (Read the Glass Tips & Tricks for application) 
Let dry for at least 20 minutes before moving piece. 

Step 3:  Place into Kiln Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

Step 4: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

Step 5: Adding Jewelry Findings

Attach the findings, on the back of the glass where you believe it is the top of the design using the Triolyse glue.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue) Attach the two earring pieces with a small loop ring.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.