|
Glass Star of David Multicolor
Free Fusible Glass Project
Materials
List: for COE 90 or COE 96
COE 90:
Qty 1 Item#
90407
2 inch Circle
Qty 1 Item#
27165 Blue Medium
COE
96:
Qty 1 Item#
96102 2 inch Circle
Qty 1 Item#
96165 Blue Medium
GLASS HANGER:
Qty
1 Item#
41317 Glass Hanger Small Nickel Plated
FUSING
SUPPLIES:
Item#
42017
Shelf
Paper 1 square foot
Item#
41207
Triolyse
Glue
OTHER SUPPLIES:
· Elmer's™ Glue
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
Small Fused Project step-by-step instructions:
Clean Up Supplies:
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
|
|
Step 1 - Preparation
· Clean Glass:
using Alcohol or Dish Washing
Detergent. Then dry and set aside on a clean piece of
paper or cardboard.
· Clean & Prep Kiln:
· Apply Kiln Wash (Shelf Primer)
· Cut Shelf Paper to fit shelf
· Place Kiln Shelf Supports, Shelf
and Shelf Paper into Kiln
|
|
·
Step 2: Put Glass project together
Place the small glass Star of David and use
a toothpick or plastic Cocktail fork to put a
"tiny" drop of glue to adhere it to the front
side of the clear medium Star of David.
Let
dry for at least 20 minutes before moving piece.
|
|
·
Step 4: Place into Kiln Using Fingers around outer edges
of the fusible glass project or wear latex
gloves, pick up (supporting the hat and place the project on the kiln shelf
paper/shelf. Leave a minimum of 1/2"
(13 mm) space between each project to ensure they do not
touch and fuse together.
·
Step 5: Kiln Firing Process- Full Fuse
|
|
SMALL/MEDIUM PROJECTS
· TACK FUSE |
| Process |
Temp/Min |
Desired Temp |
Soak Temp |
Action |
| Increase/Temp |
15°F/
9°C |
1,000°F /
538°C |
1 Min. |
Remove Vent |
| Increase/Temp |
Full
Speed |
1,350°F /
776°C |
10+ or 10-
Min. |
Observe |
| Flash/Cool |
Highest Speed |
1,100°F /
593°C |
0 Min. |
Open &
Close Lid |
| Hold/Temp |
5°F/
3°C |
955°F / 513°C |
20 min. |
Hold Fire |
| Cool/Temp |
Do
Nothing |
100°F / 38°C |
N/A |
DO NOT LOOK |
Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures
|
|
If possible, leave the kiln sit unopened
until the next day so your project has had plenty of
time to anneal back to room temperature and it is
ready to use.
·
Step 6: Adding Jewelry Findings
Attach
the clear vinyl Tie-Tack Back,
on the back at the tip of one star point
using the Triolyse glue. Make sure the
glass is clean and dry and when placing it on the center,
back side. Maximum strength is reached after 6
hours. (Read
the Tips & Tricks for using Triolyse Glue)
|
GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738
Phone: 727-397-3073 Fax: 866-814-0525
Hours of Operation (USA Eastern Time)
Monday to Friday 9 AM to 5 PM
|
|
Features
- Our pre-cut glass is MADE IN THE USA using Glass Made in
the USA!
- Fusible Glass Projects: Free with Step by Step instructions.
- Free Fusible Glass Patterns
- Wholesale accounts for Retailers and Class Instructions.
- All of our pre cut glass has smooth edges eliminating the
need for grinding and makes for safer handling.
- Create projects faster and more consistently with our
quality precut glass.
- We accept Pay Pal & Major Credit Cards
- USPS
& UPS are our primary shippers
- Product Search Page.
- Try the "Remember me" option for customer details to
prefill checkout form on your next visit.
|
»»
Login Status
