HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

 Glass Charms
Cell Phone Charm
Purse Charm or
Belt Charm 
Free Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

Materials List: for COE 90 or COE 96

COE 90: Pick base color & Ribbon color
Qty 1 Item# 27126 1 3/8 inch Black, White or Clear
Qty 1 Item# 27104 Pink or Yellow Glass Ribbon

COE 96:
Qty 1 Item# 96126 1 3/8 inch Black, White or Clear
Qty 1 Item# 96104 Pink or Yellow Glass Ribbon

Jewelry Findings:
Gold Or Silver tone to match Decal Choice:

Qty 1 Item# 41115  Small Silver Tone
Qty 1 Item# 41116  Small Gold Tone

Qty 1 Item# 42025  Charm Lanyard

FUSING SUPPLIES:
Fusible Decals: Hi Fire Gold Or Fiber
Item# 41127  Platinum
Item# 41126  Gold

Fusible Glass Supplies:
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Lay a large oval on of Decal, trace with a pencil and cut out.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Step 2: Prepare Project for Decal
· Take the Decal pieces, soak in distilled water for 20 to 30 seconds. Slide and apply to the glass oval, top side.

             (Read the Glass Tips & Tricks for application) 
Let dry for at least 20 minutes before moving piece. 

· Step 3: Prepare Glass
· Take the Glass Ribbons pieces, place a tiny dot of Elmer's glue on the top side.  Let dry for at least 20 minutes before moving piece. 

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 6: Adding Jewelry Findings

Attach the glass hanger finding to the top backside of  oval using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

Open ring on charm lanyard and attach to finding. Close ring.

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.