HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

 Glass Star of David Multicolor 
Free Fusible Glass Project

(See Glass Tips & Tricks section: How to use Dicro Slide)

Materials List: for COE 90 or COE 96

COE 90:
Qty 1 Item# 27165 Large Blue
Qty 1 Item# 27165 Clear Medium
Qty 1 Item# 27165 Small Blue

COE 96:
Qty 1 Item# 96165 Large Blue
Qty 1 Item# 96165 Medium Clear
Qty 1 Item# 96165  Small Blue

GLASS HANGER:
Qty 1 Item# 41317  Glass Hanger Small Nickel Plated

FUSING SUPPLIES:
Fusible Glass Dicro Slide ™:
Item# 41155  (Clear/Red) was used for the Medium Clear Star.

Fusible Glass Supplies:
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Lay medium clear Star of David on back of Dicro Slide ™, trace with a pencil and cut out design.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Step 2: Prepare Project for Dicro Slide ™
· Take the Dicro Slide ™ piece and soak in distilled water for 20 to 30 seconds. Slide and apply to the back side of the clear glass.

             (Read the Glass Tips & Tricks for application) 
Let dry for at least 20 minutes before moving piece. 

· Step 3: Put Glass project together    Place the small glass Star of David and use a toothpick or plastic Cocktail fork to put a "tiny" drop of glue to adhere it to the front side of the clear medium Star of David, positioning at an altered angle pattern. Then put a "tiny" drop of glue to the back side of the medium Star of David and place on top of large blue Star of David at an altered angle pattern.

Let dry for at least 20 minutes before moving piece. 

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 6: Adding Jewelry Findings

Attach the clear vinyl Tie-Tack Back, on the back at the tip of one star point using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.