HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

 Halloween Glass Witch Pin 
Free Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

(See Glass Tips & Tricks section: How to use Dicro Slide)

Materials List: for COE 90 or COE 96

COE 90:
Qty 1 Item# 27130 White Base
Qty 1 Item# 27158  Witches Hat
Qty 1 Item# 27137 Small Cirlce
any color

COE 96:
Qty 1 Item# 96130 White Base
Qty 1 Item# 96158 Witches Hat
Qty 1 Item# 96137 Small Cirlce
any color

JEWELRY FINDING:

Qty 1 Item# 42008  Tie-Tack Back, Clear Vinyl
Qty 1 Item# 42010  Tie-Tack Squeeze Back (recommended to use with different weights of clothing)

FUSING SUPPLIES:
Fusible Glass Dicro Slide ™:
Item# 41154  (Cyan/Copper) was used for the Witches Hat.
Item# 41154  (Magenta/Green) was used for the Witches eye and hat.
Fusible Glass Decal (Hi Fire All Black Enamel):
Item# 41243 Black use to form eyes and mouth

Fusible Glass Supplies:
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Cut out Black Decal to make the eyes and mouth.
· Using a scissors cut out strips of colors from the Dicro Slide ™ for the hats decoration.  

Make sure to remove tissue paper from the decal & set aside. 
Note: It is important to follow the instructions that come with your decals! Keeping you glass free of oil from your fingers is important.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Step 2: Put Glass project together    Place the small glass circle at the top the where the tip of the hat will rest.  When satisfied with the hat position, use a toothpick or plastic Cocktail fork to put a "tiny" drop of glue to adhere the Witch's hat to the top of the white glass and the small round circle. (The circle is use to allow the hat to have a shape when fired as it will drape downward between the white face and the tip of the hat.)

Let dry for at least 20 minutes before moving piece. 

· Step 3: Prepare Project for Decal & Dicro Slide ™
· Take the Dicro Slide ™ pieces and soak in distilled water for 20 to 30 seconds. Slide and apply to the front side of the glass to form the eye and hat decoration.

· Take the black Hi Fire Decal, soak in distilled water for 20 to 30 seconds. Slide and apply to the front side of the glass to form the eyes and mouth centers.

             (Read the Glass Tips & Tricks for application) 
Let dry for at least 20 minutes before moving piece. 

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 6: Adding Jewelry Findings

Attach the clear vinyl Tie-Tack Back, on the back near the top of the clear base so it will be hidden behind the hat and more centered to support weight of the face and pin, using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.