HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

 Halloween Glass Witch Pin 
Free Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

(See Glass Tips & Tricks section: How to use Dicro Slide)

Materials List: for COE 90 or COE 96

COE 90:
Qty 1 Item# 90155 Pumpkin Round
Qty 1 Item# 27158  Witches Hat
Qty 1 Item# 27137 Small Circle
any color, goes under hat

COE 96:
Qty 1 Item# 96155 Pumpkin Round
Qty 1 Item# 96158 Witches Hat
Qty 1 Item# 96137 Small Circle
any color, goes under hat.

JEWELRY FINDING:

Qty 1 Item# 42008  Tie-Tack Back, Clear Vinyl
Qty 1 Item# 42010  Tie-Tack Squeeze Back (recommended to use with different weights of clothing)

FUSING SUPPLIES:
Pick your Alphabet / Number Glass Decal 
Fusible Glass Decal
Item# 41120 Dragon Flies 
Fusible Glass Dicro Slide ™:
Item# 33023  (Cyan/Copper) was used for the Witches eye and mouth.

Fusible Glass Supplies:
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Cut out Black Decal to make the collar. the eye and mouth.
· Cut a strip of small dragon flies for the hat
· Using a hole punch cut out a circle from the Dicro Slide ™ for the mouth and using scissors cut a piece for the lips.  

Make sure to remove tissue paper & set aside. 
Note: It is important to follow the instructions that come with your decals! Keeping you glass free of oil from your fingers is important.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Step 2: Put Glass project together   Turn the pumpkin on its side so it looks like the stem is the nose. Place the small glass circle at the top against the pumpkin where the hat will be placed.  When satisfied with the hat position, use a toothpick or plastic Cocktail fork to put a "tiny" drop of glue to adhere the Witch's hat to the top of the pumpkin and the small round circle. (The circle is use to allow the hat to have a shape when fired as it will drape over it.)

Let dry for at least 20 minutes before moving piece. 

· Step 3: Prepare Project for Decals
· Take the Dicro Slide ™ pieces and soak in distilled water for 20 to 30 seconds. Slide and apply to the front side of the glass to form the eye and lips.

· Take the black Hi Fire Decal, soak in distilled water for 20 to 30 seconds. Slide and apply to the front side of the glass to form the collar, eye and mouth centers.

· Repeat soaking for the dragon flies and place on the brim of the hat.

             (Read the Glass Tips & Tricks for application) 
Let dry for at least 20 minutes before moving piece. 

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 6: Adding Jewelry Findings

Attach the clear vinyl Tie-Tack Back, on the back near the top of the clear base so it will be hidden behind the hat and more centered to support weight of the face and pin, using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtpatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.