HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

BREAST CANCER AWARENESS 
           FUSED GLASS PIN
       

MATERIAL LIST: for COE 90 or COE 96

COE 90
Item# 27130 Black Oval
Item# 27104 Pink Awareness

COE 96
Item# 96130 Black Oval
Item# 96104  Pink Awareness

JEWELRY FINDING
Item# 41163 Pin Bar Gold Tone 1 inch

FUSING SUPPLIES:
Fusible Glass Decal (Hi Fire Fiber):
Item# 41127 Fiber Platinum
Item# 41126 Fiber Gold

Fusible Glass Supplies:
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Step 1 - Preparation
· Clean Glass:  using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Place Oval on backside of Decal and trace around it with a pencil. Cut the  Decals, remove the tissue paper & set aside.
Note: It is important to follow the instructions that come with your decals! Keeping you glass free of oil from your fingers is important.

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Step 2: Prepare Project for Decals
Take the Hi Fire Decal, soak in distilled water for 20 to 30 seconds. Slide and apply to the front side of the Black glass base.  Smooth out any air bubbles..  (Read the Glass Tips & Tricks for application)   Let drive for 20 minutes.

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 6: Adding Jewelry Findings

Make sure the glass is clean and dry. Attach the Bar Pin Back, on the back near the top 1/3 rd of the clear base so it will be support weight of the pin and lay flat when worn, using the Triolyse glue.   Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.