HOME |Free Glass Projects |Fused Glass Supplies | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

 Glass Football Pin 
Free Fusible Glass Project

(See Glass Tips & Tricks: How to use Gold Pen on Glass)

(See Glass Tips & Tricks section: How to use Ferro Goldrush Pens on Glass)

Materials List: for COE 90 or COE 96

Pick Large or Small
COE 90:
Large Qty 1 Each Item# 90153 Clear & Dark Amber
or
Small Qty 1 Each Item# 90154 Clear & Dark Amber

COE 96:
Large Qty 1 Each Item# 96153 Clear & Dark Amber
or
Small Qty 1 Each Item# 96154 Clear & Dark Amber

JEWELRY FINDING:

Qty 1 Item# 42008  Tie-Tack Back, Clear Vinyl
Qty 1 Item# 42010  Tie-Tack Squeeze Back (recommended to use with different weights of clothing)

FUSING SUPPLIES:
Fusible Glass Paints:
Item# 41263 White 
Fusible Glass Supplies:
Item# 42018 Goldrush Pen
Item# 42017 Shelf Paper 1 square foot
Item# 41207 Triolyse Glue

OTHER SUPPLIES:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

Step 1 - Preparation
· Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

· Step 2: Prepare Project for Glass Paint or Gold Pen
White Paint: Draw your desired design or written information with your white paint on the dark amber glass.  Let dry at least 20 minutes and then using a tooth pick refine the lines.  Dust off any undesired specs or use a damp q- tip to pick them up off the glass

Gold Pen: Apply to the surface of the Clear Cap no to the dark amber glass.

Let dry for at least 20 minutes before moving piece. 

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 6: Adding Jewelry Findings

Attach the clear vinyl Tie-Tack Back, on the back near the top of the clear base so it will be hidden behind the hat and more centered to support weight of the face and pin, using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.