HOME |Fused Glass Supplies | Stained Glass Supplies | Precut Glass | Mosaic Glass Supplies |SEARCH |CHECKOUT| Login

Glass Pumpkin Pin
Fusible Glass Project

(See Glass Tips & Tricks section: How to use Fusible Glass Decals)

(See Glass Tips & Tricks section: How to use Dicro Slide)

Materials List:

Fusible Glass:

COE 90 1 Each
Item# 27155 Oblong Pumpkin

COE 96 1 Each
Item# 96155 Oblong Pumpkin

Glass Supplies & Tools Category:

· Dicro Slide ™ (Dicro Paper) You Pick the colors of scraps to use for the eyes and mouth. 

· Hi FIRE Silhouettes Black Enamel Decal Scrap cut for the eyes 

FUSING SUPPLIES:

Item# 41207 Triolyse Glue
Item# 42017 Shelf Paper 1 square foot

Jewelry FINDINGS:

· Tie-Tac Back, Clear Vinyl
  Item# 42008

Choose one of the following Tie-Tac backs:

· Tie-Tac Squeeze Back
  Item# 42010

· Tie-Tac Screw Back
  Item# 42009

· Alternate Pin Bar 1 inch Gold Tone
(only recommend when using a white or black base)
  Item# 41163

· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

· Step 1 - Preparation
· Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

- Cut your scraps of Dicro Slide ™ soak in water and slide into position.

- Cut your scraps of Hi FIRE Silhouettes Black Enamel Decal soak in water and slide into position.

· Step 3:  Place into Kiln Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or  wear latex gloves, pick up (supporting the hat and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process - Tack Fuse 

· Step 6: Adding Jewelry Findings

Attach the clear vinyl Tie-Tack Back, on the back near the top of the clear base so it will be hidden behind the hat and more centered to support weight of the face and pin, using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

Features

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.