Batman Pin
Fusible Glass Project

Materials List:

Fusible Glass:

COE 90 1 Each
Item# 90130 Precut White 1 3/4 " x 1 1/3" Oval
Item# 90130 Precut Clear 1 3/4 "x 1 1/3" Oval
Item# 90157 Precut Bat

COE 96 1 Each
Item# 96130 Precut White 1 3/4 " x 1 1/3" Oval
Item# 96130 Precut Clear 1 3/4 "x 1 1/3" Oval
Item# 96157 Precut Bat

FUSING SUPPLIES:
Pick your Alphabet / Number Glass Decal
Item# 41207 Triolyse Glue
Item# 42017 Shelf Paper 1 square foot

Jewelry FINDINGS:
Qty 1 Item# 33403  Tie-Tack Back, Clear Vinyl & Squeeze Clutch

OR
Alternate Pin Bar 1 inch Gold Tone
(only recommend when using a white or black base)
Item# 41163

Other Supplies:
· Elmer's™ Glue 
· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)
· Cold Polishing - (one of the following)
· Grinder 
· Abrasive Stone 
· Diamond Nail File
· 3M™ Diamond Coated Sanding Sponges

Small Fused Project step-by-step instructions:

Clean Up Supplies:

· Rubbing Alcohol, Dish Washing Detergent
· Cloth with very little lint (old T-shirt)

· Step 1 - Preparation
· Clean Glass using Alcohol or Dish Washing Detergent. Then dry and set aside on a clean piece of paper or cardboard. 

· Clean & Prep Kiln: 
    · Apply Kiln Wash (Shelf Primer)
    · Cut Shelf Paper to fit shelf
    · Place Kiln Shelf Supports, Shelf and Shelf Paper into Kiln

- Use a tiny spec of Elmer's™ Glue to adhere the bat to the surface of the clear glass.
- Place the clear on top of the white base.

· Step 3: Prepare Decal

Cut out the letters to create Bat Man.  Soak in water and slide onto the glass in the desired position.

· Step 4:  Place into Kiln Using Fingers around outer edges of the fusible glass project or better yet wear latex gloves, pick up and place the project on the kiln shelf paper/shelf.   Leave a minimum of 1/2" (13 mm) space between each project to ensure they do not touch and fuse together.

· Step 5: Kiln Firing Process- Full Fuse 

Click here for Tips & Tricks for Cone equivalency to Glass Firing temperatures

· Step 7: Attach Tie-Tac or Pin Back.
It is important to judge the weight of the finished piece.  You may find that you should attach 2 Tie-Tacs so the weight of the glass piece will not pull a hole in the clothing.   If using one only, you should attach it approximately 1/3 rd of the way from the top of the glass pin on the backside. 

Alternant choice - Attach a Metal Pin Bar

Using the Triolyse glue.  Make sure the glass is clean and dry and when placing it on the center, back side.  Maximum strength is reached after 6 hours. (Read the Tips & Tricks for using Triolyse Glue)

GlassArtPatterns.com, A Sanborn Corporation
PO Box 86747
Madeira Beach, FL 33738

Phone: 727-397-3073 Fax: 866-814-0525

Hours of Operation (USA Eastern Time)

Monday to Friday 9 AM to 5 PM

• Our pre-cut glass is MADE IN THE USA using Glass Made in the USA!
• Fusible Glass Projects: Free with Step by Step instructions.
• Free Fusible Glass Patterns
• Wholesale accounts for Retailers and Class Instructions.
• All of our pre cut glass has smooth edges eliminating the need for grinding and makes for safer handling.
• Create projects faster and more consistently with our quality precut glass.
• We accept Pay Pal & Major Credit Cards
• USPS & UPS are our primary shippers
• Product Search Page.
• Try the "Remember me" option for customer details to prefill checkout form on your next visit.